Products

Self-Regulating Silicone Rubber Heating Cable Belt

Self-Regulating Silicone Rubber Heating Cable Belt for Compressor

Due to the relationship between the temperature and the resistance value of PT100 thermal resistance, people use this characteristic to invent and produce PT100 thermal resistance temperature sensor. It is an intelligent sensor integrating temperature and humidity collection. The temperature collection range can be from -200°C to +850°C, and the humidity collection range is from 0% to 100%.

[email protected]

WhatsApp:17816879390

Send Inquiry

Product Description

Heating Cable Belt

Heating Cable

Self-Regulating Silicone Rubber Heating Cable Belt for Compressor

Model	DBR	ZBR	GBR
Available power	10,15,20,,25,30,35W/m(at10ºC)	35,40,45,50,55,60W/m(at10ºC)	35,40,45,50,55,60,65,70W/m(at10ºC)
Supply voltage allowed	DC12-36, AC220-380V	DC12-36, AC220-380V	DC12-36, AC220-380V
Maximum maintenance temperature	65ºC	85ºC/105ºC	110ºC/135ºC
Maximum exposure temperature	90ºC	130ºC	160ºC
Continuous high temperature and power failure	90ºC	130ºC	160ºC
Continuous power on	65ºC	85ºC/105ºC	110ºC/135ºC
Intermittent purging.when power is cut off	65ºC	85ºC/105ºC	110ºC/135ºC
Minimum installation temperature	-51ºC	-60ºC	-60ºC
Minimum bending radius	≥5 times thickness	≥5 times thickness	≥5 times thickness
Breadth At 20ºC	12.5mm	12.5mm	12.5mm
Steady-state base design	T4	T4	T4

Silicone Rubber Heating Cable Belt

Send Inquiry

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Product Categories

how can we help you

You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.

New Products

Related Products

silicone parallel type constant power heating cable

The Qingqichen silicone heating cable is a parallel type constant power heating cable, which is characterized by independent heating of each circuit contact. The lowest tolerance is -70°, and the highest surface temperature resistance can reach +200°C. With great flexibility, this type of heating cable is particularly suitable for industrial refrigeration due to its extreme low temperature and can be installed in the cold storage door. In order to ensure that these electric heating elements have a long service life, we recommend the use of a control device.

Silicone heater

The silicone heating element is made by pressing two pieces of semi-cured silicone cloth together using high-temperature equipment. The silicone skin is very thin, which gives it excellent thermal conductivity. It is flexible and can adhere perfectly to curved surfaces, cylinders, and other objects that require heating.

Silicone strap

Silicone sheet electric heating belt is a thin strip heating product (standard thickness is 1.5mm). It has good flexibility and can be wrapped around a pipe or other heating body with heat-resistant tape to fix it like a rope, or it can be directly wrapped in a heated The outside of the body is fixed with a spring hook, and the heating performance is better if an insulation layer is added. The heating element is made of nickel-chromium wire wrapped with heat-conducting and insulating silicone material, which is molded at high temperature, so the safety performance is very reliable. Pay attention to avoid overlapping winding installation as much as possible, so as not to affect heat transfer and affect the service life of the product.

Constant Wattage Heating Cables - Silicone Belts

Product introduction: silicone sheet electric tropical, for thin sheet heating products (standard thickness is 1.5mm), it has a good flexibility, can be wrapped like a rope around the pipe and other heating body outside with temperature tape fixed, can also be directly wrapped in the heating body outside with a spring hook fixed, such as adding insulation layer, heating performance is better. Its heating element is made of nickel-chromium wire two buns with thermal insulating silicone material, formed by high temperature molding, so the safety performance is very reliable, pay attention to avoid overlapping winding installation, so as not to affect the heat transfer, thus affecting the service life of the product.

You can contact us any way that is convenient for you.

Call for Consultation +86-13396719839、+86-17816879390、+86-15824118812
Production base No.166 Golf Road, Yinhu Street, Fuyang District, Hangzhou City, Zhejiang Province
Email for Us [email protected]

Industry Solutions

Product Categories

News Categories

XML | Sitemap | RSS | Links | Privacy Policy

Top

Home

Products